View source for A500 512K RAM Expansion

==Hardware Installation==



'''1'''  Power down the Amiga and monitor. Unplug all cables from the Amiga.


'''2'''  Anti-statically discharge yourself before handling the device.  It is recommended to use an E.S.D. wrist strap for the installation process (such as Amiga Kit product code TLSASW001).


'''3'''  Turn over the Amiga and remove the plastic trap door cover by using a small coin/flat blade screw driver to gently lever open the plastic latch.


'''4'''  Align the memory expansion's 56-pin expansion connector with the gold contacts on the motherboard and push it on until fully in place.


'''5'''  Replace trap door cover, turn over, connect all cables and power on.